Laticrete HYDRO BAN Cementitious Waterproofing Membrane

Description

Laticrete Hydro Ban Cementitious Waterproofing Membrane
Laticrete HYDRO BAN Cementitious Waterproofing Membrane is a one component, polymer fortified, cement based waterproofing material that mixes with water. This product can be used on walls and floors in wet areas; swimming pools, water features and fountains, balconies and terraces over unoccupied space.
HYDRO BAN Cementitious Waterproofing Membrane handles negative & positive hydrostatic pressure up to 2 BARS (29 PSI) when applied at 40 Mils (1mm) thick. Flood test within 2 hours. Passes ANSI A118.10 Waterproofing and ANSI A118.12 Crack Isolation (with mesh/fabric up to 1/8” (3mm)).
Uses
Interior and exterior
Swimming pools, fountains and water features
Spas and hot tubs
Terraces and balconies over unoccupied spaces
Advantages
Flood testing in 2 hours at 70°F (21°C) or higher
Does not require the use of Fabric
Can be Used under Pool Plaster
Bonds directly to metal, PVC and ABS plumbing fixtures
Anti-Fracture Protection of up to 1/8 (3 mm) over shrinkage and other non-structural cracks 1/8' with the use of mesh and fabric
"Extra Heavy Service" rating per TCNA performance level (RE: ASTM C627 Robinson floor test)
Exceeds ANSI A118.0 and A118.12 (with mesh) EN 14891 Class: CM OP
Rapid drying for a faster time to tile
Install Tile, Brick and stone directly onto membrane
GREENGUARD certified, LEED complaint
Manufacturer Part # (MPN)
30 lb bag - Laticrete Part #9259-0030-2
Payments
Shipping
Returns